With this new remote, our 520 res bullet camera will pan
back and fourth, tilt up and down, switch from positive to negative imaging,
and zoom in digitally up to 3X! (Covers a 92 degree field). With a
push of a button, you can zoom in with the remote and it's just like
changing to a closeup lens, you will get many
different views to record. The remote also has brightness
control. Turn up the brightness on those cloudy days/night fall or
turn it down for those sunny days. If
you film in the winter with snow, & bright sunlight, you should use this
remote to back down the gain on the bullet cam. It makes a world of difference
for that situation.
The optional Multi-Functional Effects
Remote Control with RCA male connector is not needed to use or
function the helmet camera! It does make the camera work to its full
capability though.
Features:
·
Digital Day/NightFeature
·
Tele-Photo+PTZ (Pan-Tilt-3X Zoom) Will auto pan, & auto tilt on command when
tele-photo/zoom is active.
·
Brightness/Lighting filter Control for bright days, or lower light conditions & a cool Negative Inversion Effect. No battery required to power the remote. It will work with
the cameras power.
·
With the optional remote, this bullet
cam amazingly will Digitally pan back and fourth, tilt up and down, and zoom in
up to 3x. The Camera Itself will not move, only the video image will accept
pan-tilt & zoom through the 130 degree field of view if you purchase
the PTZ remote control. No other bullet cam on the market can do this. We
also offer the RS485 model that will work through a digital video
surveillance recorder, or over the net.
Operational instructions: KA-08
Does not need an internal battery, it
gets power from the camera. The white rca female on the cam is not for audio,
it is for the remote only. If you plug audio into that jack, your camera will
turn to a negative look. (If you do not have the remote)plug audio back into
the white jack again to reverse the image back to normal, otherwise just press
the NEG/POSI button 1 time. When using the remote while connected to the camera
you have to press the buttons firmly with your thumbnail towards the middle of
the button. To use the PTZ feature, press & hold the tele button to where
you want the zoom to be set. Then press & hold pan or tilt to adjustment
desired. If you press pan or tilt 1 time quickly, it will internally move by
itself back & fourth/up & down until pressed again. Press & hold
wide to zoom out. In darker environments, you can press the Day&Night
ON/OFF button 1 time to clean the picture up a little. The brightness button
has to be pressed multiple times to adjust for proper lighting. On bright days
turn it down a few clicks, & on dim days, turn it up for maximum
performance clarity. The NEGA/POSI will give you a special negative effect.
Press 1 time to turn on and off. When you disconnect the remote from the
camera, the cam will remember all the settings except the tele/pan tilt. That
will reset back to normal when power is lost to the cam. You can have multiple
cameras on a system, and only need 1 remote to program them.